必須具備三類證書其中之一，Registered Design Engineer (HVAC) (注冊公用設備工程師 (暖通空調)), or Registered Mechanical Design Engineer (注冊機械工程師), or Registered Environmental Engineer (注冊環保工程師)
崗位職責：
Responsible for producing technical deliverables necessary for tendering works and project
execution according to schedule and budgets. Act as lead engineer for the assigned projects, review discipline deliverables of projects and coach junior engineers.
Typically assigned as a Lead Engineer and/or Mentor
Interpret project specification, building code and design manual information
Institute new designs based on Lessons Learned Database and Cost Reduction team findings.
Analyses the technical proposal, contract, specifications and applicable Lessons Learned relative to discipline in the project and ensures conformance to contract for all discipline engineering and material
Schedule discipline engineering work by WBS and monitor the schedule.
Assign, monitor and review the work of the project-assigned discipline engineers, and 3rd party engineers
Drawing preparation of arrangement & piping and review for design accuracy.
Estimate and monitor expended man-hours and material estimates and report updated man-hour projections on a regular basis.
Deliver checked and approved work packages (drawings, calculations, specifications, bills of materials, material requisitions, etc.) to the Project Engineering Manager (PEM) on schedule and within budget.
Provide technical support and coordination during fabrication, construction, check-out and start-up activities.
Ensure the accuracy of the discipline engineering content provided for inclusion in the O&M Manual.
Ensure all outputs are documented and archived according to applicable ISO Procedures and/or Work Instructions.
Report the project situation (for the A&P scope of supply) to the Discipline Manager (DM) during the discipline meeting.
Report to the Discipline Manager the technical problem found during the project execution and the solution realized.
Support the Discipline Manager in the standard definition. (material requisition, work requisition, standard material take off, etc.)
Follow the engineering procedures defined for each project (e.g.: correspondence coding, document flow procedure, document coding procedure, templates and standards for electronic documents).
Support the PEM in the management of the correspondence list. (answers from the engineering team to questions from the client);
Definition of document list portion relevant to A&P discipline.
Support the PEM, the Project Manager and/or the contract manager about the technical issues of the claims to/from the client/partners/subcontractors.
Prepare piping stress calculation and pipe support details and criteria.
Support the PEM to solve the NCR coming from site.
Other tasks assigned by Discipline Manager or Lead Engineer.
任職要求：
Bachelor’s Degree in Engineering required
Minimum eight (8) years’ industrial experience in Oil & Gas / Power / Chemical industries after BS, or 6 years after MS degree.
Proficient with Microsoft Word, Excel, PowerPoint;
Proficient with PDMS, AutoCAD, Caesar II;
Organizational and communication skills;
Ability to work closely in a team environment;
Demonstrates initiative, professionalism and a commitment to quality.
Proficiency in English
崗位職責：
Responsible for producing technical deliverables necessary for tendering works and project
execution according to schedule and budgets. Act as lead engineer for the assigned projects, review discipline deliverables of projects and coach junior engineers.
Typically assigned as a Lead Engineer and/or Mentor
Interpret project specification, building code and design manual information
Institute new designs based on Lessons Learned Database and Cost Reduction team findings.
Analyses the technical proposal, contract, specifications and applicable Lessons Learned relative to discipline in the project and ensures conformance to contract for all discipline engineering and material
Schedule discipline engineering work by WBS and monitor the schedule.
Assign, monitor and review the work of the project-assigned discipline engineers, and 3rd party engineers
Drawing preparation of arrangement & piping and review for design accuracy.
Estimate and monitor expended man-hours and material estimates and report updated man-hour projections on a regular basis.
Deliver checked and approved work packages (drawings, calculations, specifications, bills of materials, material requisitions, etc.) to the Project Engineering Manager (PEM) on schedule and within budget.
Provide technical support and coordination during fabrication, construction, check-out and start-up activities.
Ensure the accuracy of the discipline engineering content provided for inclusion in the O&M Manual.
Ensure all outputs are documented and archived according to applicable ISO Procedures and/or Work Instructions.
Report the project situation (for the A&P scope of supply) to the Discipline Manager (DM) during the discipline meeting.
Report to the Discipline Manager the technical problem found during the project execution and the solution realized.
Support the Discipline Manager in the standard definition. (material requisition, work requisition, standard material take off, etc.)
Follow the engineering procedures defined for each project (e.g.: correspondence coding, document flow procedure, document coding procedure, templates and standards for electronic documents).
Support the PEM in the management of the correspondence list. (answers from the engineering team to questions from the client);
Definition of document list portion relevant to A&P discipline.
Support the PEM, the Project Manager and/or the contract manager about the technical issues of the claims to/from the client/partners/subcontractors.
Prepare piping stress calculation and pipe support details and criteria.
Support the PEM to solve the NCR coming from site.
Other tasks assigned by Discipline Manager or Lead Engineer.
任職要求：
Bachelor’s Degree in Engineering required
Minimum eight (8) years’ industrial experience in Oil & Gas / Power / Chemical industries after BS, or 6 years after MS degree.
Proficient with Microsoft Word, Excel, PowerPoint;
Proficient with PDMS, AutoCAD, Caesar II;
Organizational and communication skills;
Ability to work closely in a team environment;
Demonstrates initiative, professionalism and a commitment to quality.
Proficiency in English
職位類別： 管道工程師
舉報
- 公司規模：1000人以上
- 公司性質：外商獨資
- 所屬行業：電力環保類
- 所在地區：北京-朝陽區
- 聯系人：高小姐
- 手機：會員登錄后才可查看
- 郵箱：會員登錄后才可查看
- 郵政編碼：100027
工作地址
- 地址：三里屯西六街6號乾坤大廈
